概述賀德克壓力表,進口德國HYDAC壓力表
Ambient temperature range: -20°C up to max. +50°C
Viscosity range: 7,4 – 400 mm2/s is recommended
Filtration: Class 20/18/15 according to ISO 4406

更新時間：2025-02-20

訪問量：3198

廠商性質：經銷商

在線詢價 聯系我們

產品介紹

概述賀德克壓力表,進口德國HYDAC壓力表
Installation: no orientation restriction
Hole pattern: ISO 6264-08 Weight: 4,3 kg
由于所產生的壓力不平衡，主活塞抵靠復位彈簧移動，
并使油從端口P轉到T.這一直持續到系統壓力等于彈簧壓力，
閥再次關閉。注意：T口的壓力正在增加開啟壓力！
導式壓力釋放閥VP-DBP10在副板設計中有一個導和一個主要階段 - 都是提升式。
其功能是限制系統的壓力。
當端口P的壓力過導的預設彈簧張力時，提升閥打開，油從后側流向油箱端口。

概述賀德克壓力表,進口德國HYDAC壓力表
Hole pattern to ISO 6264-08, Nominal size 10 - low flow loss
by maximum size bore holes - Remote control over port X possible
SPECIFICATIONS Operating pressure: max. 350 bar Flow rate: max.
The pilot operated pressure relief valve
VP-DBP10 is a leakage-free poppet valve - subplate mounted -
used for limiting the inlet pressure by opening
the outlet against spring force. Qmax = 200 l/min Pmax = 350 bar
400 l/min Operating fluid: hydraulic oil to
DIN 51524 part 1 and 2 Operating fluid
As the resulting pressure is not balanced, the main piston moves against the return spring,
temperature range: -20°C up to max. +80°C